Ide Ata

IDE Hard Drives Explained

Integrated Drive Electronics (IDE) interface in actual practice refers to ATA or AT Attachment. Any drive with a built-in controller is also called an IDE. Many IDE Hard Drives are plugged into a bus connector on the motherboard. These drives are easy to install and require the smallest number of cables because the controller is on the drive itself. No doubt ATA refers to its drive, but IDE on the other hand refers to the type of interface connector i.e. 40 pin in this case. ATA Packet interface or ATAPI is an extension of IDE which permit various devices like CD ROMs to work by using the IDE norms. Through this packet interface such devices are connected directly to an IDE port, but a device driver is needed to make full use of the device, meanwhile a Hard Drive is originally supported by IDE without the assistance of any drivers.

IDE Hard Drives can be found with most compatible computers, each computer is equipped with a maximum of four IDE devices. If you intend to buy IDE/ATAPI/ATA hard disk drive ensures there is available space for the drive to be connected. IDE hard drives are being used during the early Compaq 386 systems by way of WD controllers. During 1980s the ATA IDE was made as an ANSI standard, so a common design was created, but various areas were left open for different manufacturers for their own commands. Later two drives in the same system were considered as a hard nut to crack.

Because each drive has its own controller and both drives usually operate over the same bus. With the introduction of ATA, two drives were able to operate in a chain, thus, primary drive became the master and the secondary drive became the slave. IDE hard drives can be differentiated by a master or a slave with a jumper on the drive itself. While purchasing a second IDE Hard Drive you should stick with the same manufacturer to avoid unavoidable problems because of the compatibility issues involved. For example if you use Maxtor hard drive, choose a second hard drive from the same manufacturer. Sometimes, it could happen if you choose a different manufacturer’s IDE hard drive; it will not work on the same cable but will require a separate cables.

Apart from its interface, it is important to look for the transfer rate of the IDE hard drive. Long transfer rates means slower speeds of your computer while transferring larger files. While buying the IDE hard drive look for specifications like Rotations per Minute (RPM) i.e. 5,400 or 7,200 RPM. 7,200 RPM is ideal today.
Because of its older interface IDE hard drives generally carry a higher price tag like that of Seagate Barracuda 7200.10 1TB, this drive supports incredible space on a IDE interface. There are various manufacturers involved in making IDE Hard Drives like to name a few, Seagate, Hitachi, Western Digital, Toshiba and Iogear, they come in varying sizes ranging from 250GB to a whopping 2TB.

About the Author

Sophie Milch currently manages purchasing and inventory control for Comnauts.com. Sophie keeps herself busy by making sure our inventory is filled with quality products, the latest and the greatest. Sophie holds a B.Sc. in Mathematics from the University of Waterloo and is frequent contributor to several technology blogs and magazines. When she’s not working; in typical nerd fashion you can catch Sophie twittering friends, beating down Murlocs in World of Warcraft and watching re-runs of the X-files.

Logicube OmniClone 5u IDE/ATA PATA Hard Drive Duplicator


StorCase kingston Data Express ATA100 Hot Swap IDE (SP2E102).


StorCase kingston Data Express ATA100 Hot Swap IDE (SP2E102).


$69.99


Product Specifications:
Data Express DE100 – Storage drive cage

This tray supports ATA-33.

Kit is complete with Tray + carrier. I think all kits are complete with hardware screws
Great for IDE Hot swap
Great for Parents who want to keep their Hard Drive separate from their Kids
Manufacturer: Kingston
Model: SP2E102…


Makita Lxt211 Case


Makita Lxt211 Case


$21.99


Lxt211 case…

New Vantec Cb-Isatau2 Sata/Ide To Usb2.0 Adapter Supports Ata/Atapi-7 Lba-48 Addressing


New Vantec Cb-Isatau2 Sata/Ide To Usb2.0 Adapter Supports Ata/Atapi-7 Lba-48 Addressing




Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive - WD5000AAKX


Western Digital Caviar Blue 500 GB SATA III 7200 RPM 16 MB Cache Bulk/OEM Desktop Hard Drive – WD5000AAKX


$67.49


The Western Digital WD5000AAKX Caviar Blue Hard Drive provide performance and reliability for everyday computing. It features 500GB and SATA 6Gbps interface which increases airflow and offers less clutter in the computer system compared to PATA drives….

2.5 USB 2.0 SATA Hard Drive HDD Case Enclosure


2.5 USB 2.0 SATA Hard Drive HDD Case Enclosure


$1.99


Portable mobile storage! Connect your 2.5-inch notebook SATA hard drive to a USB port with this External AluminumSATA HDD Enclosure. With its USB 2.0 interface, you’ll get quick data transfers of up to 480 Mbps. Its Silver aluminum casing keeps your hard drive cool for maximum performance and its self powered design means there is no power adapter to carry. For a low cost solution for your externa…

SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for 2.5 / 3.5 Inch Hard Drive / Optical Drive with External AC Power Adapter


SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for 2.5 / 3.5 Inch Hard Drive / Optical Drive with External AC Power Adapter


$6.06


Use your 2.5″ / 3.5″ IDE hard drive or SATA hard disc as an additional external hard drive. Connect your SATA / IDE device to your computer through a USB port. Compliant with USB 1.1 and 2.0 standards. Usb 2.0 interface for 480 MB/s high speed data transfer. Package includes USB to IDE / SATA cable adapter, SATA data cable, AC adapter, AC to IDE power converter, IDE to SATA and power cable….

Syba SY-BIR-IDESA IDE/SATA Converter Bi-Directional IDE to SATA


Syba SY-BIR-IDESA IDE/SATA Converter Bi-Directional IDE to SATA


$5.82


SYBA SATA/IDE 2WAY CONVERTER JM…

STARTECH IDE TO SATA CONVERTER ADAPTER Data Transfer Rate 150 Mbps Cost-Effective Solution


STARTECH IDE TO SATA CONVERTER ADAPTER Data Transfer Rate 150 Mbps Cost-Effective Solution


$18.59


This IDE to SATA Drive Adapter Kit offers a simple way to install Serial ATA hard drives using an available IDE port – a cost-effective solution for using newer SATA drives on a legacy computer or a computer with all SATA connections already in use. This dual channel bridge lets you connect two high-speed SATA drives without the cost and effort of upgrading your IDE (Parallel ATA) motherboard, whi…

Cp Technololgies - 3.5 USB 2.0 One Button Backup HD Case


Cp Technololgies – 3.5 USB 2.0 One Button Backup HD Case


$38.99


DETAILS: After the installation of a 3.5 inch Hard Drive and simple software configuration, you can backup, restore or synchronize with just a touch of a button. Keep your important files completely backed up on this sleek new “Hot Swappable” Aluminum HD case. Product Description: CP Technologies 3.5 Inch One Button Backup Hard Drive Case – storage enclosure – IDE/ATA – Hi-Speed USB Device Type: S…

MSI K8N Neo2 Platinum MS-7025 Motherboard from Compaq GX5050


MSI K8N Neo2 Platinum MS-7025 Motherboard from Compaq GX5050


$279.99


Slots

* One AGP (Accelerated Graphics Port) 1.5V 4X/8X slot
* Five 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface).

On-Board IDE/SATA

* An IDE controller on the nVIDIA nForce3 Ultra chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes.
o Can connect up to 4 IDE devices
* Supports 4 SATA ports. Transfer rate is up to 150MB/s
* …